M&C Portable Gas Sample Probe PSP4000-H /C /T

• Light, easy to handle and compact construction
• Electrically heated – adjustable from 100 to 180 °C
• With integrated micro-filter
• Variable probe tube- and connection technique
• Integrated temperature measurement
• Sample extraction also with heated sample probe tube

The portable gas sample probe PSP4000-H is electrically heated. Temperature controlling is achieved by an integrated capillary sensor-thermostat, adjustable from 100 to 180 °C. A signal lamp is extinguished on reaching the operating ttemperature and flashes in the cycle of temperature regulation. A carrying handle and a chain for in situ attachment are mounted on the heat-isolated housing.

The integrated micro-filter element with a fineness degree of 2 μm reliably retains solid impurities and can be changed easily. For heavy-oil firing measurements, a stainless-steel filter cartridge /FW for filter-pads is optionally available. The wide and versatile range of sampling probes with diameters from 6 to 12 mm ø, adapters and thread fittings allows adaptation to the most varied circumstances.

At the version PSP4000-H/C calibration gas injection into the probe is possible without dismounting the probe.

Simultaniously temperature measurement during sample extraction is also available for version PSP4000-H/C/T.
In conjunction with the gas sample probe PSP4000-H..., a specially designed heated sample line PSP4M4/6 with interchangeable PTFE hosing or PSP-W4M4/6 with a smaller outside diameter is supplied.

The probe's electrical power is then fed to the probe via the feed line integrated
within the sample line. An aluminium-composite case is optionally available
for the safe transport of the probe and up to 5 meters of type PSP4M4/6 respectively
8 m of type PSP-W4M4/6 heated sample line.

For availability and recommendations, please call us at 800.399.4236 or email a Sales Engineer. Or click on the RFQ link to submit project details.